BNSF 6387 and 3947 lead CSX S577 as the crew backs a loaded military train onto the Ft. Campbell lead at Hopkinsville, Ky, from the CSX Henderson Subdivision on July 9th, 2024, under threatening skies during a Tornado Warning spawned by the remnants of Hurricane Alberto. Fellow railfan Brian Caswell and I sat for a couple hours hoping that Ft. Campbell would show up to carry the equipment onto the base, but unfortunately it didn’t happen. Despite the warnings here very little rain fell and most of the tornados spawned in our area were more to the northeast up in Indiana. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1000, ISO 200. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography #trendingphoto #militarytrains #stormyweather

BNSF 6387 and 3947 lead CSX S577 a loaded military train on the Ft. Campbell lead at Hopkinsville, Ky

BNSF 6387 and 3947 lead CSX S577 as the crew backs a loaded military train onto the Ft. Campbell lead at Hopkinsville, Ky, from the CSX Henderson Subdivision on July 9th, 2024, under threatening skies during a Tornado Warning spawned by the remnants of Hurricane Alberto. Fellow railfan Brian Caswell and I sat for a couple hours hoping that Ft. Campbell would show up to carry the equipment onto the base, but unfortunately it didn’t happen. Despite the warnings here very little rain fell and most of the tornados spawned in our area were more to the northeast up in Indiana.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1000, ISO 200.

CSX G366 pulls northbound approaching Anaconda at Robards, Kentucky on July 5th, 2024, on the CSX Henderson Subdivision. G366 is normally just an empty grain train, here it was hauling a long string of maintenance of way equipment which will be used in an upcoming CSX work curfew that is scheduled to begin on the subdivision in the next week or so. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2500, ISO 150. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography

CSX G366 pulls northbound approaching Anaconda at Robards, Kentucky

CSX G366 pulls northbound approaching Anaconda at Robards, Kentucky on July 5th, 2024, on the CSX Henderson Subdivision. G366 is normally just an empty grain train, here it was hauling a long string of maintenance of way equipment which will be used in an upcoming CSX work curfew that is scheduled to begin on the subdivision in the next week or so.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2500, ISO 150.

The CSX Conrail Heritage Locomotive leads CSX I026 northbound through the curve at Breton, Ky, on July 10th, 2024, on the CSX Henderson Subdivision as they make their daily run to Chicago, Illinois. According to a CSX Press Release: July 22, 2023 – CSX has unveiled the fourth locomotive in its series of custom paint designs that honor its heritage railroads. The latest in the series commemorates the Consolidated Rail Corporation, or Conrail, and bears the number 1976, the year the railroad was founded. CSX and Norfolk Southern acquired and divided most of the Conrail network in 1997. Today, the company continues to exist as a terminal and switching railroad for CSX and NS customers in North Jersey-New York City metro area. The Conrail paint scheme of a double-lined C inside a large, bold Q was a fixture for many years across the Northeast where the majority of the railroad’s operations were centered. The heritage locomotive design conceived and executed at CSX’s locomotive shop in Waycross, Georgia, recreates the iconic “Conrail Quality” logo and features Conrail blue on the rear two-thirds of the engine, then transitions to the current CSX colors and design on the cab portion of the unit. CSX 1976 and other locomotives in the heritage series will be placed into revenue service and travel CSX’s 20,000 rail network, reinforcing employee pride in the history of the railroad that continues to move the nation’s economy with safe, reliable and sustainable rail-based transportation services. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2000, ISO 100. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography #trendingphoto

CSX Conrail Heritage Locomotive leads CSX I026 northbound through the curve at Breton, Ky

The CSX Conrail Heritage Locomotive leads CSX I026 northbound through the curve at Breton, Ky, on July 10th, 2024, on the CSX Henderson Subdivision as they make their daily run to Chicago, Illinois.

According to a CSX Press Release: July 22, 2023 – CSX has unveiled the fourth locomotive in its series of custom paint designs that honor its heritage railroads. The latest in the series commemorates the Consolidated Rail Corporation, or Conrail, and bears the number 1976, the year the railroad was founded.

CSX and Norfolk Southern acquired and divided most of the Conrail network in 1997. Today, the company continues to exist as a terminal and switching railroad for CSX and NS customers in North Jersey-New York City metro area.

The Conrail paint scheme of a double-lined C inside a large, bold Q was a fixture for many years across the Northeast where the majority of the railroad’s operations were centered. The heritage locomotive design conceived and executed at CSX’s locomotive shop in Waycross, Georgia, recreates the iconic “Conrail Quality” logo and features Conrail blue on the rear two-thirds of the engine, then transitions to the current CSX colors and design on the cab portion of the unit.

CSX 1976 and other locomotives in the heritage series will be placed into revenue service and travel CSX’s 20,000 rail network, reinforcing employee pride in the history of the railroad that continues to move the nation’s economy with safe, reliable and sustainable rail-based transportation services.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2000, ISO 100.

Atlantic Coast Line Heritage Unit CSXT 1871 runs as a mid-train DPU unit as it heads south through downtown Mortons Gap, Kentucky on July 12th, 2024, on the CSX Henderson Subdivision. This was my first catch on this heritage unit and while I would prefer it to be leading, I didn’t want to pass up a chance of catching this unit for my first time! According to a CSX Press Release: November 29, 2023 - The CSX fleet of heritage locomotives is continuing to grow with the introduction of a unit painted in a custom design honoring the Atlantic Coast Line Railroad. Designated CSX 1871, the seventh locomotive in the heritage series was unveiled at the CSX Locomotive Shop in Waycross, Georgia, which has designed and applied the paint schemes for all the heritage units. The latest in the series features the modern CSX design on the head end, transitioning to historic paint scheme and logo of the Atlantic Coast Line at the rear. The Atlantic Coast Line name first appeared in 1871, and the American Coast Line Railroad (ACL) was officially incorporated in 1900. The ACL extended from Georgia to Richmond, Virginia, and later expanded into Florida. In 1960, the company opened a new headquarters building in Jacksonville, which continues as CSX headquarters to this day. The ACL merged with the Seaboard Air Line Railroad in 1967 to form the Seaboard Coast Line, which later became part of CSX. “We do a lot of research on the colors and the schemes just to make sure that we get it right,” said Jeromy Hutchison, CSX carman painter. “We want to make sure we do our heritage justice.” CSX 1871 will carry the ACL colors in service across the 20,000-mile CSX network, reinforcing employee pride in the history of the railroad that continues to move the nation’s economy with safe, reliable and sustainable rail-based transportation services. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1600, ISO 100. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography #trendingphoto #csxheritagelocomotive #AtlanticCoasLine

Atlantic Coast Line Heritage Unit CSXT 1871 runs as a mid-train DPU on I025 at Mortons Gap, Ky

Atlantic Coast Line Heritage Unit CSXT 1871 runs as a mid-train DPU unit as it heads south through downtown Mortons Gap, Kentucky on July 12th, 2024, on the CSX Henderson Subdivision. This was my first catch on this heritage unit and while I would prefer it to be leading, I didn’t want to pass up a chance of catching this unit for my first time!

According to a CSX Press Release: November 29, 2023 – The CSX fleet of heritage locomotives is continuing to grow with the introduction of a unit painted in a custom design honoring the Atlantic Coast Line Railroad.

Designated CSX 1871, the seventh locomotive in the heritage series was unveiled at the CSX Locomotive Shop in Waycross, Georgia, which has designed and applied the paint schemes for all the heritage units. The latest in the series features the modern CSX design on the head end, transitioning to historic paint scheme and logo of the Atlantic Coast Line at the rear.

The Atlantic Coast Line name first appeared in 1871, and the American Coast Line Railroad (ACL) was officially incorporated in 1900. The ACL extended from Georgia to Richmond, Virginia, and later expanded into Florida. In 1960, the company opened a new headquarters building in Jacksonville, which continues as CSX headquarters to this day. The ACL merged with the Seaboard Air Line Railroad in 1967 to form the Seaboard Coast Line, which later became part of CSX.

“We do a lot of research on the colors and the schemes just to make sure that we get it right,” said Jeromy Hutchison, CSX carman painter. “We want to make sure we do our heritage justice.”

CSX 1871 will carry the ACL colors in service across the 20,000-mile CSX network, reinforcing employee pride in the history of the railroad that continues to move the nation’s economy with safe, reliable and sustainable rail-based transportation services.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1600, ISO 100.

This week’s Saturday Infrared photo is of CSXT 5486 leading the daily local L391 that runs between Caskey Yard in Hopkinsville, Ky and Atkison Yard in Madisonville, Ky as it heads north out of Mortons Gap, Ky on May 31st, 2024, on the CSX Henderson Subdivision. Tech Info: Fuji XT-1, RAW, Converted to 720nm B&W IR, Nikon 10-24mm @15mm, f/5.6, 1/600, ISO 400. #trainphotography #railroadphotography #trains #railways #jimpearsonphotography #infraredtrainphotography #infraredphotography #trainphotographer #railroadphotographer #csxrailroad #csxhendersonsubdivision

Saturday Infrared photo is of CSXT 5486 leading the daily local L391 NB at Mortons Gap, Ky

This week’s Saturday Infrared photo is of CSXT 5486 leading the daily local L391 that runs between Caskey Yard in Hopkinsville, Ky and Atkison Yard in Madisonville, Ky as it heads north out of Mortons Gap, Ky on May 31st, 2024, on the CSX Henderson Subdivision.

Tech Info: Fuji XT-1, RAW, Converted to 720nm B&W IR, Nikon 10-24mm @15mm, f/5.6, 1/600, ISO 400.

July 13th, 2024 – Episode 80 – Saturday Edited Video from Jim Pearson Photography

This week we catch CSX action between Kelly and Slaughters, Kentucky, including the CSX Operation Lifesaver engine and a southbound military train move with BNSF power, bound for Ft. Campbell, Ky, on the CSX Henderson Subdivision! Sit back, turn up the sound, expand to full screen and enjoy the trains!! Please like, share, subscribe and thanks for watching!

BNSF 6387 and 3947 lead CSX S577 as the crew backs a loaded military train onto the Ft. Campbell lead at Hopkinsville, Ky, from the CSX Henderson Subdivision on July 9th, 2024, under threatening skies during a Tornado Warning spawned by the remnants of Hurricane Alberto. Fellow railfan Brian Caswell and I sat for a couple hours hoping that Ft. Campbell would show up to carry the equipment onto the base, but unfortunately it didn’t happen. Despite the warnings here very little rain fell and most of the tornados spawned in our area were more to the northeast up in Indiana. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1000, ISO 170. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography #trendingphoto #militarytrains #stormyweather

CSX S577 backs a loaded military train onto the Ft. Campbell lead at Hopkinsville, Ky

BNSF 6387 and 3947 lead CSX S577 as the crew backs a loaded military train onto the Ft. Campbell lead at Hopkinsville, Ky, from the CSX Henderson Subdivision on July 9th, 2024, under threatening skies during a Tornado Warning spawned by the remnants of Hurricane Alberto. Fellow railfan Brian Caswell and I sat for a couple hours hoping that Ft. Campbell would show up to carry the equipment onto the base, but unfortunately it didn’t happen. Despite the warnings here very little rain fell and most of the tornados spawned in our area were more to the northeast up in Indiana.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1000, ISO 170.

CSX M513 heads southbound with CSX Pittsburgh & Lake Erie Railroad Heritage Unit (P&LE), 1875, leading the way as they pass the Hopkinsville Elevator Company at Hopkinsville, Ky on the CSX Henderson Subdivision, on June 24th, 2024. According to a CSX Press Release: June 6, 2024 - CSX has released a new heritage locomotive, the P&LE 1875, paying tribute to the storied Pittsburgh & Lake Erie Railroad (P&LE). The 15th in CSX’s heritage locomotive series, this new addition to the company’s fleet not only celebrates the rich history of P&LE but also marks a significant milestone in CSX's ongoing commitment to honoring the legacies of America's historic railroads. The Pittsburgh & Lake Erie Railroad was established in 1875 with a primary mission of transporting essential industrial materials such as coal, coke, iron ore, limestone, and steel among the bustling industrial hubs of the region. “It’s mainline connected Pittsburgh, Pennsylvania with Youngstown, Ohio and Connellsville, Pennsylvania. It did not actually reach Lake Erie until 1976,” explained Tim Music, a carman painter at the CSX Waycross Locomotive Shop where the unit was produced. Despite its relatively modest route mileage, the P&LE Railroad earned the nickname "Little Giant" due to the enormous volume of heavy tonnage it moved. This impressive capability drew significant attention and by 1887, the P&LE became a subsidiary of the dominant New York Central Railroad. Under this new ownership, the P&LE enjoyed substantial improvements to its tracks and added capacity for passenger services, further enhancing its regional significance. Over time, P&LE expanded by leasing branches from smaller railroads. These extensions included lines southeast along the Monongahela River through Homestead and McKeesport, and along the Youghiogheny River to Connellsville, where it connected with the Western Maryland Railway. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2000, ISO 100. #railroad #railroads #train, #trains #railway #railway #steamtrains #railtransport #railroadengines #picturesoftrains #picturesofrailways #besttrainphotograph #bestphoto #photographyoftrains #steamtrainphotography #CSXPLEheritageunit #bestsoldpicture #JimPearsonPhotography #csxheritagelocomotive

CSX M513 heads SB with CSX Pittsburgh & Lake Erie Railroad Heritage Unit (P&LE), 1875 at Hopkinsville, Ky

CSX M513 heads southbound with CSX Pittsburgh & Lake Erie Railroad Heritage Unit (P&LE), 1875, leading the way as they pass the Hopkinsville Elevator Company at Hopkinsville, Ky on the CSX Henderson Subdivision, on June 24th, 2024.

According to a CSX Press Release: June 6, 2024 – CSX has released a new heritage locomotive, the P&LE 1875, paying tribute to the storied Pittsburgh & Lake Erie Railroad (P&LE). The 15th in CSX’s heritage locomotive series, this new addition to the company’s fleet not only celebrates the rich history of P&LE but also marks a significant milestone in CSX’s ongoing commitment to honoring the legacies of America’s historic railroads.

The Pittsburgh & Lake Erie Railroad was established in 1875 with a primary mission of transporting essential industrial materials such as coal, coke, iron ore, limestone, and steel among the bustling industrial hubs of the region.

“It’s mainline connected Pittsburgh, Pennsylvania with Youngstown, Ohio and Connellsville, Pennsylvania. It did not actually reach Lake Erie until 1976,” explained Tim Music, a carman painter at the CSX Waycross Locomotive Shop where the unit was produced.

Despite its relatively modest route mileage, the P&LE Railroad earned the nickname “Little Giant” due to the enormous volume of heavy tonnage it moved. This impressive capability drew significant attention and by 1887, the P&LE became a subsidiary of the dominant New York Central Railroad. Under this new ownership, the P&LE enjoyed substantial improvements to its tracks and added capacity for passenger services, further enhancing its regional significance.

Over time, P&LE expanded by leasing branches from smaller railroads. These extensions included lines southeast along the Monongahela River through Homestead and McKeesport, and along the Youghiogheny River to Connellsville, where it connected with the Western Maryland Railway.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2000, ISO 100.

CSX M502 heads north from the south end of Atkinson Yard at Madisonville, Ky with CSX Pere Marquette Heritage Unit, 1899, leading the way on the CSX Henderson Subdivision, on May 20th, 2024. According to a CSX Press Release: May 1, 2024 - CSX has introduced the latest addition in its heritage locomotive series, paying homage to the rich history of the Pere Marquette Railroad. This new unit showcases the Pere Marquette's legacy, dating back to its inception on November 1, 1899. The Pere Marquette Railroad, operating in the Great Lakes region of the United States and parts of southern Ontario, Canada, derived its name from Jacques Marquette, a notable French Jesuit missionary credited with founding Michigan's first European settlement in Sault Ste Marie. After years of operation, the company merged with the Chesapeake and Ohio Railway (C&O) on June 6, 1947, eventually becoming part of the renowned CSX network. The design of the Pere Marquette heritage locomotive was meticulously crafted by employees at the CSX Waycross Locomotive Shop. According to CSX Carman Painter Eric Lee, “We had to measure each stripe precisely and position the words just right to ensure it captured the look of the original design. It took us about four days just to lay out the stripes before we could begin painting.” A fascinating tidbit related to the history of Pere Marquette is its cameo in the 2004 film "The Polar Express." The steam locomotive Pere Marquette 1225 served as the inspiration for the train depicted in the movie, with audio recordings of the actual locomotive in operation featured in the film. Interestingly, the locomotive had been donated to Michigan State University and was exhibited near the university's football stadium. The author of "The Polar Express" book drew inspiration from seeing this locomotive on display during childhood, solidifying its place in popular culture. CSX's dedication to honoring the history and significance of the Pere Marquette Railroad through this new locomotive underscores the company's commitment to preserving and celebrating the heritage of American railroads. Keep an eye out as this remarkable piece of history moves across the CSX network, bridging the past with the present. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1000, ISO 100. #railroad #railroads #train, #trains #railway #railway #steamtrains #railtransport #railroadengines #picturesoftrains #picturesofrailways #besttrainphotograph #bestphoto #photographyoftrains #steamtrainphotography #CSXPereMarquetteheritageunit #bestsoldpicture #JimPearsonPhotography #csxheritagelocomotive

CSX M502 heads north from the south end of Atkinson Yard at Madisonville, Ky

CSX M502 heads north from the south end of Atkinson Yard at Madisonville, Ky with CSX Pere Marquette Heritage Unit, 1899, leading the way on the CSX Henderson Subdivision, on May 20th, 2024.

According to a CSX Press Release: May 1, 2024 – CSX has introduced the latest addition in its heritage locomotive series, paying homage to the rich history of the Pere Marquette Railroad. This new unit showcases the Pere Marquette’s legacy, dating back to its inception on November 1, 1899.

The Pere Marquette Railroad, operating in the Great Lakes region of the United States and parts of southern Ontario, Canada, derived its name from Jacques Marquette, a notable French Jesuit missionary credited with founding Michigan’s first European settlement in Sault Ste Marie. After years of operation, the company merged with the Chesapeake and Ohio Railway (C&O) on June 6, 1947, eventually becoming part of the renowned CSX network.

The design of the Pere Marquette heritage locomotive was meticulously crafted by employees at the CSX Waycross Locomotive Shop. According to CSX Carman Painter Eric Lee, “We had to measure each stripe precisely and position the words just right to ensure it captured the look of the original design. It took us about four days just to lay out the stripes before we could begin painting.”

A fascinating tidbit related to the history of Pere Marquette is its cameo in the 2004 film “The Polar Express.” The steam locomotive Pere Marquette 1225 served as the inspiration for the train depicted in the movie, with audio recordings of the actual locomotive in operation featured in the film. Interestingly, the locomotive had been donated to Michigan State University and was exhibited near the university’s football stadium. The author of “The Polar Express” book drew inspiration from seeing this locomotive on display during childhood, solidifying its place in popular culture.

CSX’s dedication to honoring the history and significance of the Pere Marquette Railroad through this new locomotive underscores the company’s commitment to preserving and celebrating the heritage of American railroads. Keep an eye out as this remarkable piece of history moves across the CSX network, bridging the past with the present.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1000, ISO 100.

CSXT 4568, 50th Anniversary Operation Lifesaver locomotive, pulls a heavy M647 mixed freight as it passes the north end of Kelly, Ky on July 7th, 2024, on the CSX Henderson Subdivision. According to a CSX press release: CSX unveiled a new Operation Lifesaver rail safety commemorative locomotive in September of 2022, and it was painted at the railroads locomotive shop in Huntington, West Virginia. The CSXT 4568 engine will travel the company’s rail network as a visual reminder for the public to be safe at highway-rail grade crossings and near railroad tracks. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/3200, ISO 110. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography #trendingphoto #csxt #trainsfromadrone #csxoperationlifesaver

CSXT 4568, 50th Anniversary Operation Lifesaver locomotive, pulls a heavy M647 SB at Kelly, Ky

CSXT 4568, 50th Anniversary Operation Lifesaver locomotive, pulls a heavy M647 mixed freight as it passes the north end of Kelly, Ky on July 5th, 2024, on the CSX Henderson Subdivision.

According to a CSX press release: CSX unveiled a new Operation Lifesaver rail safety commemorative locomotive in September of 2022, and it was painted at the railroads locomotive shop in Huntington, West Virginia. The CSXT 4568 engine will travel the company’s rail network as a visual reminder for the public to be safe at highway-rail grade crossings and near railroad tracks.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/3200, ISO 110.

CSX I025 meets G366 at Anaconda, just north of Sebree, Kentucky as it heads south on July 5th, 2024, on the CSX Henderson Subdivision. G366 is normally just an empty grain train, but today it was hauling a long string of maintenance of way equipment which will be used in an upcoming CSX work curfew that is scheduled to begin on the subdivision in the next week or so. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1600, ISO 110. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography #trendingphoto #csxt #trainsfromadrone #csxoperationlifesaver

CSX I025 meets G366 at Anaconda, just north of Sebree, Kentucky

CSX I025 meets G366 at Anaconda, just north of Sebree, Kentucky as it heads south on July 5th, 2024, on the CSX Henderson Subdivision. G366 is normally just an empty grain train, but today it was hauling a long string of maintenance of way equipment which will be used in an upcoming CSX work curfew that is scheduled to begin on the subdivision in the next week or so.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/1600, ISO 110.

CSXT 4568, 50th Anniversary Operation Lifesaver locomotive, pulls a heavy M647 mixed freight as it heads south out of the Crofton Cut on July 7th, 2024, on the CSX Henderson Subdivision, just north of Crofton, Kentucky. According to a CSX press release: CSX unveiled a new Operation Lifesaver rail safety commemorative locomotive in September of 2022, and it was painted at the railroads locomotive shop in Huntington, West Virginia. The CSXT 4568 engine will travel the company’s rail network as a visual reminder for the public to be safe at highway-rail grade crossings and near railroad tracks. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2000, ISO 130. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography #trendingphoto #csxt #trainsfromadrone #csxoperationlifesaver

CSXT 4568, 50th Anniversary Operation Lifesaver locomotive, pulls a heavy M647…

CSXT 4568, 50th Anniversary Operation Lifesaver locomotive, pulls a heavy M647 mixed freight as it heads south out of the Crofton Cut on July 5th, 2024, on the CSX Henderson Subdivision, just north of Crofton, Kentucky.

According to a CSX press release: CSX unveiled a new Operation Lifesaver rail safety commemorative locomotive in September of 2022, and it was painted at the railroads locomotive shop in Huntington, West Virginia. The CSXT 4568 engine will travel the company’s rail network as a visual reminder for the public to be safe at highway-rail grade crossings and near railroad tracks.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2000, ISO 130.

July 6th, 2024 – Episode 79 Saturday Edited Video from Jim Pearson Photography

This week we catch CSX action between Ridgetop, Tennessee and Slaughters, Kentucky, including the Seaboard System Heritage unit as DPU on an I025 at Crofton, Ky, the P&LE HU at Nortonville, Ky and CSX M512 northbound with a newly rebuilt Metra 515 locomotive trailing, on the CSX Henderson Subdivision! Sit back, turn up the sound, expand to full screen and enjoy the trains!! Please like, share, subscribe and thanks for watching!

Metra 515 brings up the rear of a string of six units leading CSX M512 as they head north at Romney, Nortonville, Kentucky on their way north on June 27th, 2024, on the CSX Henderson Subdivision. Right behind the Metra unit is the start of a long string of Toyota Truck frames. I’m told that this is the first rebuilt ex-Kansas City unit by the Albertville, Ala.-based Progress Rail Services Corporation for Metra and part of an ongoing program and there are nine more being rebuilt numbered 515-523. According to Wikipedia: Metra (reporting mark METX) is the primary commuter rail system in the Chicago metropolitan area serving the city of Chicago and its surrounding suburbs via the Union Pacific Railroad, BNSF Railway, and other railroads. The system operates 243 stations on 11 rail lines. It is the fourth busiest commuter rail system in the United States by ridership and the largest and busiest commuter rail system outside the New York City metropolitan area. In 2023, the system had a ridership of 31,894,900, or about 147,800 per weekday as of the first quarter of 2024. The estimated busiest day for Metra ridership occurred on November 4, 2016—the day of the Chicago Cubs 2016 World Series victory rally. Metra is the descendant of numerous commuter rail services dating to the 1850s. The present system dates to 1974, when the Illinois General Assembly established the Regional Transportation Authority (RTA) to consolidate all public transit operations in the Chicago area, including commuter rail. The RTA's creation was a result of the anticipated failure of commuter service operated and owned by various private railroad companies in the 1970s. In a 1983 reorganization, the RTA placed commuter rail under a newly formed Commuter Rail Division, which branded itself as Metra in 1985. Freight rail companies still operate four of Metra's routes under purchase-of-service agreements. Metra owns all rolling stock and is responsible for all stations along with the respective municipalities. Since its inception, Metra has directed more than $5 billion into the commuter rail system of the Chicago metropolitan area alongside the CTA. Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2000, ISO 100. #railroad #railroads #train #trains #bestphoto #railroadengines #picturesoftrains #picturesofrailway #bestphotograph #photographyoftrains #trainphotography #JimPearsonPhotography #trendingphoto #csxt #trainsfromadrone #metra

Metra 515 brings up the rear of a string of six units leading CSX M512 as they head north at Romney, Nortonville, Ky

Metra 515 brings up the rear of a string of six units leading CSX M512 as they head north at Romney, Nortonville, Kentucky on their way north on June 27th, 2024, on the CSX Henderson Subdivision. Right behind the Metra unit is the start of a long string of Toyota Truck frames.

I’m told that this is the first rebuilt ex-Kansas City unit by the Albertville, Ala.-based Progress Rail Services Corporation for Metra and part of an ongoing program and there are nine more being rebuilt numbered 515-523.

According to Wikipedia: Metra (reporting mark METX) is the primary commuter rail system in the Chicago metropolitan area serving the city of Chicago and its surrounding suburbs via the Union Pacific Railroad, BNSF Railway, and other railroads. The system operates 243 stations on 11 rail lines. It is the fourth busiest commuter rail system in the United States by ridership and the largest and busiest commuter rail system outside the New York City metropolitan area. In 2023, the system had a ridership of 31,894,900, or about 147,800 per weekday as of the first quarter of 2024. The estimated busiest day for Metra ridership occurred on November 4, 2016—the day of the Chicago Cubs 2016 World Series victory rally.

Metra is the descendant of numerous commuter rail services dating to the 1850s. The present system dates to 1974, when the Illinois General Assembly established the Regional Transportation Authority (RTA) to consolidate all public transit operations in the Chicago area, including commuter rail. The RTA’s creation was a result of the anticipated failure of commuter service operated and owned by various private railroad companies in the 1970s. In a 1983 reorganization, the RTA placed commuter rail under a newly formed Commuter Rail Division, which branded itself as Metra in 1985. Freight rail companies still operate four of Metra’s routes under purchase-of-service agreements. Metra owns all rolling stock and is responsible for all stations along with the respective municipalities. Since its inception, Metra has directed more than $5 billion into the commuter rail system of the Chicago metropolitan area alongside the CTA.

Tech Info: DJI Mavic 3 Classic Drone, RAW, 22mm, f/2.8, 1/2000, ISO 100.