Passenger Trains – Page 8 – Jim Pearson Photography

Amtrak 4632 leads train 313, Missouri River Runner at St. Louis, MO

Amtrak 4632 leads train 313, Missouri River Runner, as pulls west to Kansas City, MO, out of the 12th Street Yard on the TRRA Merchants Subdivision after departing the Gateway Transportation Center in downtown St. Louis Missouri on May 21st, 2022. On the right we have a Union Pacific intermodal snaking its way east on the UP Jefferson City Subdivision.

According to Wikipedia: The Gateway Multimodal Transportation Center, also known as Gateway Station, is a rail and bus terminal station in downtown St. Louis, Missouri. Opened in 2008 and operating 24 hours a day, it serves Amtrak trains and Greyhound and Burlington Trailways interstate buses. Missouri’s largest rail transportation station.

Tech Info: Nikon D800, RAW, Sigma 18-300 @ 50mm, f/4.8, 1/500, ISO 1400.

A selection of new videos are available!

You’ll find a new selection of videos on my Facebook and YouTube Channels featuring this move of the CSX President’s Business train and CSXT 911 Honoring First Responders engine, among others! Pay a visit and be sure to subscribe so you don’t miss anything new!

CSX P001-09 Presidential Office Car passenger train passes the old Louisville and Nashville Passenger depot at Henderson, Kentucky

May 12, 2022 – CSX P001-09 Presidential Office Car passenger train passes the old Louisville and Nashville Passenger depot at Henderson, Kentucky as CSXT 1, 2 and 3 leads the way.

CSX Transportation has repainted 3 of its executive fleet F40PH locomotives in a paint scheme inspired by predecessor Baltimore & Ohio and a fleet of cars to finish out the train set. The city of Baltimore chartered the railroad on Feb. 28, 1827, to build west to a suitable point on the Ohio River. Ground was broken on July 4, 1828, at Carrollton, Md. By 1929 the railroad operated 5,658 miles of track and had 2,364 locomotives. In the 1970s the B&O became part of Chessie System and in the 1980s it became part of CSX.
According to the abandonedonline.net website: This depot, built of brick and granite, was constructed by the local firm Bailey & Koerner opened at the cost of $25,000 on July 1, 1902. The Union Station replaced the separate stations for the L&N and the IC. The former L&N depot was converted into the residence for the local yard foreman while the former IC station was used until it was demolished in November 1942.

By 1922, Union Station was handling 24 passenger trains daily, but the advent of the automobile and the construction of the interstate highway system and parkways in the region decimated passenger trains. The IC ceased passenger operations on February 13, 1941, and the station was closed by the L&N after it ceased passenger trains in 1971.

The depot is currently owned by Railmark Foundation and is under restoration. I’ve not found out what it’s intended use will be.

Tech Info: DJI Mavic Air 2S Drone, Altitude 55ft, RAW, 22mm, f/2.8, 1/2500, ISO 140.

CSX P001-09 Presidential Office Car passenger train heads through the S curve at Nortonville, Kentucky

May 12, 2022 – CSX P001-09 Presidential Office Car passenger train heads through the S curve at Nortonville, Kentucky, with CSXT 1, 2 and 3 leading the way, southbound on the Henderson Subdivision.

CSX Transportation has repainted 3 of its executive fleet F40PH locomotives in a paint scheme inspired by predecessor Baltimore & Ohio and a fleet of cars to finish out the train set. The city of Baltimore chartered the railroad on Feb. 28, 1827, to build west to a suitable point on the Ohio River. Ground was broken on July 4, 1828, at Carrollton, Md. By 1929 the railroad operated 5,658 miles of track and had 2,364 locomotives. In the 1970s the B&O became part of Chessie System and in the 1980s it became part of CSX.

Tech Info: Nikon D800, RAW, Sigma 150-600 @ 220mm, f/5.3, 1/2000, ISO 560.

CSX P001-09 Presidential Office Car passenger train heads north over the Ohio river bridge from Henderson, Ky

May 12, 2022 – CSX P001-09 Presidential Office Car passenger train heads north over the Ohio river bridge from Henderson, Ky down the Viaduct into Evansville, Indiana on the Henderson Subdivision with CSXT 1, 2 and 3 leading the way.

CSX Transportation has repainted 3 of its executive fleet F40PH locomotives in a paint scheme inspired by predecessor Baltimore & Ohio and a fleet of cars to finish out the train set. The city of Baltimore chartered the railroad on Feb. 28, 1827, to build west to a suitable point on the Ohio River. Ground was broken on July 4, 1828, at Carrollton, Md. By 1929 the railroad operated 5,658 miles of track and had 2,364 locomotives. In the 1970s the B&O became part of Chessie System and in the 1980s it became part of CSX.

Tech Info: DJI Mavic Air 2S Drone, RAW, 22mm, f/2.8, 1/1500, ISO 110.

Nevada Northern Railway #81 runs with a short passenger train through Moser Cut heading to Ely, Nevada

Nevada Northern Railway #81 runs with a short passenger train through Moser Cut on the high line as it heads toward the the Steptoe Valley and Ely, Nevada on February 13th, 2022 during the museums winter photo charter event.

Nevada Northern No. 81 is a “Consolidation” type (2-8-0) steam locomotive that was built for the Nevada Northern in 1917 by the Baldwin Locomotive Works in Philadelphia, PA, at a cost of $23,700. It was built for Mixed service to haul both freight and passenger trains on the Nevada Northern railway.

Nevada Northern Railway steam locomotive #81 pulls a passenger train through one of the S curves in Robinson Canyon

Nevada Northern Railway steam locomotive #81 pulls a passenger train through one of the S curves in Robinson Canyon under the control of engineer Don Hepler, as it heads south out of Ely, Nevada during the museums Winter Photo Charter event as the light begins to drop behind the mountains on February 13th, 2022.

According to Wikipedia: The Nevada Northern Railway Museum is a railroad museum and heritage railroad located in Ely, Nevada and operated by a historic foundation dedicated to the preservation of the Nevada Northern Railway.

The museum is situated at the East Ely Yards, which are part of the Nevada Northern Railway. The site is listed on the United States National Register of Historic Places as the Nevada Northern Railway East Ely Yards and Shops and is also known as the “Nevada Northern Railway Complex”. The rail yards were designated a National Historic Landmark District on September 27, 2006. The site was cited as one of the best-preserved early 20th-century railroad yards in the nation, and a key component in the growth of the region’s copper mining industry. Developed in the first decade of the 20th century, it served passengers and freight until 1983, when the Kennecott Copper Company, its then-owner, donated the yard to a local non-profit for preservation. The property came complete with all the company records of the Nevada Northern from its inception.

Engine #81 is a “Consolidation” type (2-8-0) steam locomotive that was built for the Nevada Northern in 1917 by the Baldwin Locomotive Works in Philadelphia, PA, at a cost of $23,700. It was built for Mixed service to haul both freight and passenger trains on the Nevada Northern railway.

Tech Info: Nikon D800, RAW, Sigma 150-600 @ 210mm, f/5.6, 1/800, ISO 250.

CSX P001-18 OCS Business Train heads north at Red River Bridge, Adams, TN

CSXT 1, 2 and 3 (three former Amtrak F40PHs) head across the Red River Bridge at Adams, Tennessee, on a beautiful fall afternoon, as they lead CSX P001-18 Office Car Special passenger train north on the Henderson Subdivision on November 9th, 2021.

The train was carrying VIPs from CSX Transportation, who were on an inspection tour of some of their lines and the facilities along them.

Tech Info: DJI Mavic Air 2S Drone, RAW, 22mm, f/2.8, 1/640, ISO 110.

CSX Office Car Special P001-18 sits on Main 1 at Casky Yard, Hopkinsville, KY

CSXT 1, 2 and 3 (three former Amtrak F40PH’s) sit stopped on Main 1 at Casky Yard in Hopkinsville, Kentucky in its beautiful B&O paint.

The crew was waiting for the VIPs on CSX P001-18 Office Car Special passenger train to finish an inspection tour of the yard, before heading on north on the Henderson Subdivision on November 9th, 2021.

Tech Info: DJI Mavic Air 2S Drone, RAW, 22mm, f/2.8, 1/250, ISO 120.

CSX W989 with Union Pacific 2603 leading a brand new Brightline Inter-City Trainset at Robards, KY

CSX W989 with Union Pacific 2603 leading a brand new Brightline Inter-City Trainset, passes a northbound empty coal train at Robards, Kentucky, as it heads south as on the Henderson Subdivision to Florida on October 8th, 2021.

According to Wikipedia: Brightline is a privately run inter-city rail route between Miami and West Palm Beach, Florida. Brightline began operating over its current route in January 2018 and the company is currently building an extension to the Orlando International Airport which is expected to enter service in 2022.

As of August 2020, it is the only privately owned and operated intercity passenger railroad in the United States. The line was developed starting in March 2012 as All Aboard Florida by Florida East Coast Industries, a Florida real estate developer owned by Fortress Investment Group. Construction began in November 2014 on stations and improvements to tracks owned by the Florida East Coast Railway, which at the start of construction, was also owned by Fortress (it was sold in January 2018).

Tech Info: DJI Mavic Air 2S Drone, RAW, 22mm, f/2.8, 1/1600, ISO 100.

CSX W989 with Union Pacific 2603 leading a Florida Brightline Trainset at Nortonville, KY

CSX W989 with Union Pacific 2603 leading snakes through the S curve at Nortonville, Kentucky with a brand new Brightline inter-city Trainset as it heads south as on the Henderson Subdivision to Florida on October 8th, 2021.

According to Wikipedia: Brightline is a privately run inter-city rail route between Miami and West Palm Beach, Florida. Brightline began operating over its current route in January 2018 and the company is currently building an extension to the Orlando International Airport which is expected to enter service in 2022.

As of August 2020, it is the only privately owned and operated intercity passenger railroad in the United States. The line was developed starting in March 2012 as All Aboard Florida by Florida East Coast Industries, a Florida real estate developer owned by Fortress Investment Group. Construction began in November 2014 on stations and improvements to tracks owned by the Florida East Coast Railway, which at the start of construction, was also owned by Fortress (it was sold in January 2018).

Tech Info: DJI Mavic Air 2S Drone, RAW, 22mm, f/2.8, 1/1600, ISO 100.

Union Pacific 2603 leads a brand new Brightline Commuter Trainset south at Hopkinsville, Kentucky

Union Pacific 2603 leads a brand new Brightline inter-city Trainset as it heads south as CSX W989 on the Henderson Subdivision at John Rivers Road Crossing at CSX Casky yard in Hopkinsville, Kentucky as it heads south to Florida on October 8th, 2021.

According to Wikipedia: “Brightline is a privately run inter-city rail route between Miami and West Palm Beach, Florida. Brightline began operating over its current route in January 2018 and the company is currently building an extension to the Orlando International Airport which is expected to enter service in 2022.

As of August 2020, it is the only privately owned and operated intercity passenger railroad in the United States. The line was developed starting in March 2012 as All Aboard Florida by Florida East Coast Industries, a Florida real estate developer owned by Fortress Investment Group. Construction began in November 2014 on stations and improvements to tracks owned by the Florida East Coast Railway, which at the start of construction, was also owned by Fortress (it was sold in January 2018).”

Tech Info: DJI Mavic Air 2S Drone, RAW, 22mm, f/2.8, 1/2000, ISO 100.

Brightline inter-city Trainset southbound at CSX Casky Yard, Hopkinsville, Kentucky

Union Pacific 2603 leads a brand new Brightline inter-city Trainset as it heads south as CSX W989 on the Henderson Subdivision at CSX Casky yard in Hopkinsville, Kentucky on its way south to Florida on October 8th, 2021.

According to Wikipedia: “Brightline is a privately run inter-city rail route between Miami and West Palm Beach, Florida. Brightline began operating over its current route in January 2018 and the company is currently building an extension to the Orlando International Airport which is expected to enter service in 2022.

As of August 2020, it is the only privately owned and operated intercity passenger railroad in the United States. The line was developed starting in March 2012 as All Aboard Florida by Florida East Coast Industries, a Florida real estate developer owned by Fortress Investment Group. Construction began in November 2014 on stations and improvements to tracks owned by the Florida East Coast Railway, which at the start of construction, was also owned by Fortress (it was sold in January 2018).

In late 2018, it was announced that Virgin Group would become a minority investor in the railroad and would provide rights to rebrand the service as Virgin Trains USA. In August 2020 they reverted to the Brightline name, ending the branding deal, claiming that Virgin had not provided the agreed investment money.”

Tech Info: DJI Mavic Air 2S Drone, RAW, 22mm, f/2.8, 1/2000, ISO 100.

Tennessee Central Railway Museums E8 unit, 6902 sits idling at Watertown, TN

This was my first time chasing the Tennessee Moonshine Sippin’ Excursion Train from the Tennessee Central Railway Museum (TCRX), which operates out of Nashville, TN, on June 12th, 2021. While it was a hot and muggy day, me and fellow railfan Ryan Scott, of Steelrails, had a great time chasing this train from Nashville to Watertown, TN and back, along the Nashville, and Eastern Railway line.

Here Tennessee Central Railway Museums E8 unit, 6902 sits idling, after running around it’s train at Watertown in preparation for their return trip to Nashville.

According to their website: EMD E8 6902 was built as New York Central 4084 in 1953. This unit would’ve been at the head end of many name trains of the Central’s Great Steel Fleet; including the 20th Century Limited, the Empire State Express, and the Ohio State Limited, among others. The E8 (termed DPA-5e by NYC) would serve in passenger service through the Penn Central merger, and commuter service for New Jersey Transit, before settling down at the New Georgia Railroad in 1992. When the latter operation folded, a museum member purchased this unit for use on the Broadway Dinner Train, which prompted the silver and maroon colors worn today.

Since 1989, TCRM has been running passenger excursions from Nashville to points east such as Lebanon, Watertown, Baxter, Cookeville, and Monterey, Tennessee.

Tech Info: Nikon D800, RAW, Sigma 150-600mm @ 390mm, f/8, 1/2000, ISO 360.

Engineer Ed Dickens keeps an eye on the track ahead, south of Chester, Illinois

Engineer Ed Dickens keeps an eye on the track ahead as Union Pacific Big Boy 4014 heads north on the UP Chester Subdivision somewhere south of Chester, Illinois, as they make the way to St. Louis, MO during the trains recent tour around central united states on August 28th, 2021.

Tech Info: Nikon D800, RAW, Sigma 150-600mm @ 340mm, f/5.6, 1/1600, ISO 320.

Union Pacific Big Boy 4014 at Brewerville, Illinois

The conductor and others on the Union Pacific Big Boy 4014 crew keeps an eye on the tracks ahead as they round the curve after crossing the Kaskaskia River bridge on the UP Chester Subdivision at Brewerville, Illinois, as they make the way to St. Louis, MO, the last stop on this leg of their journey.

Tech Info: Nikon D800, RAW, Sigma 150-600mm @ 165mm, f/5, 1/1600, ISO 200, August 28, 2021.

Union Pacific 4014 northbound at Newport, AR

Union Pacific steam locomotive 4014, the Big Boy, with its entire train in view, passes the Farmers Elevator complex as it heads north on the UP Hoxie Subdivision at Newport, Arkansas on August 27th, 2021. Here it is on the leg of its trip from Little Rock, AR to Poplar Bluff, MO during its month-long tour around the Union Pacific line.

The Big Boy is an articulated 4-8-8-4 steam locomotive which was manufactured by the American Locomotive Company (ALCO) of Schenectady, New York in 1941. There were a total 25 of these giants built and of the eight remaining locomotives this is the only operational one.

Tech Info: DJI Mavic Air 2 Drone, RAW, 4.5mm (24mm equivalent lens) f/2.8, 1/800, ISO 100, August 27, 2021.

UP 4014 northbound on the Hoxie Sub

Engineer Ed Dickens watches the road ahead in this Infrared photograph of the Union Pacific Big Boy, as it approaches a crossing north of Walnut Ridge, Arkansas on the Hoxie Subdivision, during its run between Little Rock and Poplar Bluff on August 27, 2021.

UP 4014 is an articulated 4-8-8-4 steam locomotive that was manufactured by the American Locomotive Company. There were a total 25 of these giants built and of the eight remaining locomotives this is the only operational one.

The Big Boy is on a month-long tour around the Midwest through, Arkansas, Colorado, Kansas, Illinois, Louisiana, Missouri, Nebraska, Oklahoma, Texas, and Wyoming before heading home to Cheyenne, Wyoming.

Tech Info: Fuji XT-1, RAW, sensor converted to 720nm B&W IR, Nikon 70-300 @200mm, f/8, 1/500, ISO 200.

Union Pacific's 4014, the Big Boy, passes over Corning Lake as it approaches downtown Corning, Arkansas on Friday, August 27th, 2021, as they head north on the UP Hoxie subdivision on its way to Popular Bluff, AR.

The Big Boy is an articulated 4-8-8-4 steam locomotive which was manufactured by the American Locomotive Company (ALCO) of Schenectady, New York in 1941. There were a total 25 of these giants built and of the eight remaining locomotives this is the only operational one.

According to Wikipedia: "The locomotive operated in revenue service until 1959, when it was donated to the Railway and Locomotive Historical Society in late 1961 and thereafter displayed in Fairplex at the RailGiants Train Museum in Pomona, California.

In 2013, UP re-acquired the locomotive and launched a restoration project at their Steam Shop in Cheyenne, Wyoming. In May 2019, No. 4014 was operated for the first time after sitting dormant for almost six decades.

It ran its first excursion, double-headed with Union Pacific 844, three days later on May 4, 2019. Now part of the Union Pacific's heritage fleet, it now operates in excursion service, in addition to hauling revenue freight during ferry moves."

The Big Boy is currently on a month-long tour around the Midwest through, Arkansas, Colorado, Kansas, Illinois, Louisiana, Missouri, Nebraska, Oklahoma, Texas, and Wyoming before heading home to Cheyenne, Wyoming on September 7th. For the route and schedule visit: https://www.up.com/heritage/steam/schedule/index.htm to see if it's stopping near you!

Tech Info: Wide Photo: DJI Mavic Air 2 Drone, RAW, 4.5mm (24mm equivalent lens) f/2.8, 1/800, ISO 100, August 27, 2021.

#trainphotography #railroadphotography #trains #railways #dronephotography #jimpearsonphotography

Union Pacific 4014 Northbound at Corning, AR

Union Pacific’s 4014, the Big Boy, passes over the Black River as it approaches downtown Corning, Arkansas on Friday, August 27th, 2021, as they head north on the UP Hoxie subdivision on its way to Poplar Bluff, AR.

The Big Boy is an articulated 4-8-8-4 steam locomotive which was manufactured by the American Locomotive Company (ALCO) of Schenectady, New York in 1941. There were a total 25 of these giants built and of the eight remaining locomotives this is the only operational one.

According to Wikipedia: “The locomotive operated in revenue service until 1959, when it was donated to the Railway and Locomotive Historical Society in late 1961 and thereafter displayed in Fairplex at the RailGiants Train Museum in Pomona, California.

In 2013, UP re-acquired the locomotive and launched a restoration project at their Steam Shop in Cheyenne, Wyoming. In May 2019, No. 4014 was operated for the first time after sitting dormant for almost six decades.

It ran its first excursion, double-headed with Union Pacific 844, three days later on May 4, 2019. Now part of the Union Pacific’s heritage fleet, it now operates in excursion service, in addition to hauling revenue freight during ferry moves.”

The Big Boy is currently on a month-long tour around the Midwest through, Arkansas, Colorado, Kansas, Illinois, Louisiana, Missouri, Nebraska, Oklahoma, Texas, and Wyoming before heading home to Cheyenne, Wyoming on September 7th. For the route and schedule visit: https://www.up.com/heritage/steam/schedule/index.htm to see if it’s stopping near you!

Tech Info: Wide Photo: DJI Mavic Air 2 Drone, RAW, 4.5mm (24mm equivalent lens) f/2.8, 1/800, ISO 100, August 27, 2021.

An infrared photograph of Union Pacific's 4014, Big Boy as it backs into the static display area at Popular Bluff, Arkansas on UP's Hoxie Subdivision, on August 27th, 2021, during its overnight stop on their month-long tour around the United States.

The Big Boy is an articulated 4-8-8-4 steam locomotive which was manufactured by the American Locomotive Company (ALCO) of Schenectady, New York in 1941. There were a total 25 of these giants built and of the eight remaining locomotives this is the only operational one.

According to Wikipedia: The locomotive operated in revenue service until 1959, when it was donated to the Railway and Locomotive Historical Society in late 1961 and thereafter displayed in Fairplex at the RailGiants Train Museum in Pomona, California.

In 2013, UP re-acquired the locomotive and launched a restoration project at their Steam Shop in Cheyenne, Wyoming. In May 2019, No. 4014 was operated for the first time after sitting dormant for almost six decades.

It ran its first excursion, double-headed with Union Pacific 844, three days later on May 4, 2019. Now part of the Union Pacific's heritage fleet, it now operates in excursion service, in addition to hauling revenue freight during ferry moves.

Tech Info: Fuji XT-1, RAW, Converted to 720nm B&W IR, Nikon 12-24 @24mm, f/4.5, 1/500, ISO 200.

Union Pacific 4014 at Poplar Bluff, MO

An infrared photograph of Union Pacific’s 4014, Big Boy as it backs into the static display area at Popular Bluff, Missouri on UP’s Hoxie Subdivision, on August 27th, 2021, during its overnight stop on their month-long tour around the United States.

The Big Boy is an articulated 4-8-8-4 steam locomotive which was manufactured by the American Locomotive Company (ALCO) of Schenectady, New York in 1941. There were a total 25 of these giants built and of the eight remaining locomotives this is the only operational one.

According to Wikipedia: “The locomotive operated in revenue service until 1959, when it was donated to the Railway and Locomotive Historical Society in late 1961 and thereafter displayed in Fairplex at the RailGiants Train Museum in Pomona, California.

In 2013, UP re-acquired the locomotive and launched a restoration project at their Steam Shop in Cheyenne, Wyoming. In May 2019, No. 4014 was operated for the first time after sitting dormant for almost six decades.

It ran its first excursion, double-headed with Union Pacific 844, three days later on May 4, 2019. Now part of the Union Pacific’s heritage fleet, it now operates in excursion service, in addition to hauling revenue freight during ferry moves.”

Tech Info: Fuji XT-1, RAW, Converted to 720nm B&W IR, Nikon 12-24 @24mm, f/4.5, 1/500, ISO 200.

Union Pacific 4014 Big Boy on the move!

A Selection of videos from my Union Pacific 4014, Big Boy Chase on August 27th & 28th, 2021 through Arkansas, Missouri & Illinois along the UP Hoxie and Chester Subdivisions.