April 14, 2015 – CSX Q647 heads south on the Henderson Subdivision after getting a green signal at the south end of the siding at Rankin, Ky, with engines 224, 7543 and 5333 as power.

April 15, 2015 – A Paducah and Louisville Maintenance of Way train makes it’s way through the Richland, Ky area dropping ties along the right-of-way, heading south with PAL 3804 in the lead and 3806 trailing.

April 14, 2015 – CSX Q029 passes the signals at the north end of the Robards, Ky siding as it heads south on the Henderson Subdivision with engine 3013 in the lead.

April 14, 2015 – CSX empty coal train E497 heads off CSX’s Texas Line onto the Henderson Subdivision taking its train north at Henderson, Ky. I understand coal drags don’t usually take the Texas Line, but it was right behind autorack train L204.

April 8, 2015 – LoRam Ditching machine DC-2 heads south just past the south end of Romney siding as it heads south at Mannington, Ky for its next ditching assignment on of CSX’s Henderson Subdivision.

April 6, 2015 – A loaded coal train, with CSX engine 971 in the lead, enters the north end of Kelly siding as it makes its way south on the Henderson Subdivision at Kelly, Ky.

April 10, 2015 – While out railfanning today in Evansville, Indiana I stumbled across this minor derailment of two cars on the Pigeon Creek bridge that runs along West Ohio Street. They were on a short local being pulled by CSX Switcher 1229 with Chessie System Caboose #904138 trailing.

April 9, 2015 – CSX V188 creeps up the grade at Kelly, Ky with a empty grain train, where it pulled in behind a coal train, on the Henderson Subdivision. Both trains went into the siding to allow intermodal Q025 to pass with it’s hot cargo.

March 7, 2015 – CSX G104 approaches Rankin, Ky with engine 4769 in the lead as it heads north on the Henderson Subdivision.

April 9, 2015 – A empty CSX coal train, with engine 4575 in the lead, passes milepost 249 approaching the overpass at Cavanaugh Lane in Kelly, Ky as it heads north on the Henderson Subdivision.

April 6, 2015 – CSX Q514, being led by UP 7511, approaches the Crofton Cut as it heads north on the Henderson Subdivision, just north of Crofton, Ky.

April 10, 2015 – A CSX Henderson Subdivision Maintenance of Way crew works on the switch at the south end of Henderson, under the recently powered up new cantilever signal bridge, at Henderson, Ky as the last light of day fades from the sky. CSX has been working for sometime now replacing and upgrading signals along the subdivision and this is among the first to be activated.

April 9, 2015 – Did a bit of sight surveying today along part of the RJ Corman line that runs through Russellville, Ky where I captured this scene of the Adairville Feed Mill there and a string of cars along the RJ Corman Railroad line running next to it.

April 9, 2015 – Storm clouds loom over a CSX ballast train, with HLCX lease units, 6503 and 8148, as it sits at the south end of the new Casky Inspection Yard being built at Hopkinsville, Ky on the Henderson Subdivision.

April 4, 2015 – CSX Q645 heads south on the Henderson Subdivision with engine 5112 in the lead as it approaches Guthrie, Ky.

April 4, 2015 – CSX Q647 moves onto track two at the north end of Casky with engine 291 in the lead, as it heads south on the Henderson Subdivision at Hopkinsville, Ky.

April 6, 2015 – CSX Q514, being led by UP 7511, approaches the Crofton Cut as it heads north on the Henderson Subdivision, just north of Crofton, Ky.

April 6, 2015 – CSX L688, CSX “Diversity in Motion” engine 699 and 7635 trailing, heads out of the siding at the north end of Kelly, Ky onto the main as it heads north on the Henderson Subdivision.

April 4, 2015 – A CSX empty autorack train rounds the curve at the north end of the siding at Kelly, Ky as Union Pacific engine 3794 leads the train north on the Henderson Subdivision.

April 4, 2015 – CSX Q025-04 passes K457 at the south end of Romney Siding as it heads south on the Henderson Subdivision at Nortonville, Ky.